Jump to content

Discovery I - fluid leaks - oil???


john01473

Recommended Posts

1, i have noticed that when parked on a road with a camber there appears to be fluid stains on the road under the back axle / diff.

its hard to tell what the fluid is - does not look or smell like diesal.

looking underneath i can tsee anything.

when parked on the level of my drive - not a drip.

i do not have wading plugs in -

any ideas?

2, i noticed tonight that there is some dribble marks on the outside of the front off side wheel -

could this be brake fluid leak ?

what do i check?

cheers

Big John

Link to comment
Share on other sites

1. Diff pinion oil seal is faulty, when u park on level ground the diff oil level is below the seal so no drips.

2. More like a faulty hub oil seal, that would deposit oil on the wheel & tyre.

thanks mate.

i did wonder if it was something like this

1, - i think i may have discovered something - yesterday i put fuel in the truck -

i just put carpet under the truck and parked it on the camber.

after a minute i noticed that two drips started. they are from the fuel tank

it seems as if they are comming from on top of the tank.

put it back on the flat and it stopped.

any ideas?

2, i looked underneath this morning and the hub is coated in muck and oil.

any idea of part number and how hard it is to do.

cheers

Big John

Link to comment
Share on other sites

1. If it's fuel it could be coming from theround fuel sender gasket on the top of the tank. That's discounting any holes in the tank.

2. Looking in my disco parts book it's FTC4785 outer two required and FRC8222 inner two required.

Sorry can't help with the job I haven't had to do it.... yet.

Link to comment
Share on other sites

1. If it's fuel it could be coming from theround fuel sender gasket on the top of the tank. That's discounting any holes in the tank.

2. Looking in my disco parts book it's FTC4785 outer two required and FRC8222 inner two required.

Sorry can't help with the job I haven't had to do it.... yet.

1, is that the unit under the round metal plate held in by 6 screws in the floor near the door.

do i undo the plate to check for diesal?

i recetly had the floor replaced.

2, thanks for part numbers.

cheers

Big John

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy