daftpooly Posted May 6, 2009 Share Posted May 6, 2009 OK boys this is my first thread so I'm ready for the PI55 taking. I have 300 series 3.9EFi Disco with only one pipe connected to the distributor vacuum advance that goes back to the plenum. There's another outlet on the opposite side of the distibutor vacuum advance, where should the plumbing run to? Quote Link to comment Share on other sites More sharing options...
Fern Posted May 6, 2009 Share Posted May 6, 2009 Nowhere. Just leave it. Quote Link to comment Share on other sites More sharing options...
kevinr Posted May 6, 2009 Share Posted May 6, 2009 OK boys this is my first thread so I'm ready for the PI55 taking. I have 300 series 3.9EFi Disco with only one pipe connected to the distributor vacuum advance that goes back to the plenum. There's another outlet on the opposite side of the distibutor vacuum advance, where should the plumbing run to? I do believe it should be capped off..I have a discovery V* 3.9 EFI, and that's what I have, the one pipe running to the plenum, and a second pipe, that is just capped off with a black dust cover...of course, it is possible that a different landrover model has a different setup. but I see no real reason why. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.