smo Posted June 19, 2009 Share Posted June 19, 2009 Do all rear shafts, either HD or standard, have integrated drive flanges on them?? Quote Link to comment Share on other sites More sharing options...
ciderman Posted June 19, 2009 Share Posted June 19, 2009 Np the later 90 rears have a separate flange , the shafts are quite a bit more HD as well , compared to the early TD5/300 ones But they do suffer spline wear on the flange end if not kept greased . Quote Link to comment Share on other sites More sharing options...
smo Posted June 19, 2009 Author Share Posted June 19, 2009 Interesting, cheers for the info, just been looking at the ashcroft site too. The original thoughts were regarding to some design im conisdering, however it now raises quesitons over the "HD" shafts i have on the rear of mine.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.