AndyO Posted December 7, 2009 Share Posted December 7, 2009 I have just had the clutch changed on my 90 (200tdi). a Vaelo unit was fitted with assoc bearings & a new release arm etc. I had changed the master & slave cyls last year? maybe the year before. Anyway, the question is, the bite point seems very low (about an inch from the floor). is this right? I've never had a new clutch in a car before so don't know what I was expecting - but it jsut seems too sudden. Can any of you learned people suggest if this is normal or not. Thanks in advance Andy Quote Link to comment Share on other sites More sharing options...
FLASH Posted December 7, 2009 Share Posted December 7, 2009 Does not seem right to me not long ago put a new borg & beck unit in my 200 and that bites about halve way up Quote Link to comment Share on other sites More sharing options...
errol209 Posted December 7, 2009 Share Posted December 7, 2009 Not right at all. I suggest you follow the attached instructions for a ferpect clutch experience 33clutch.pdf Quote Link to comment Share on other sites More sharing options...
AndyO Posted December 7, 2009 Author Share Posted December 7, 2009 Ta very much for that - I will give it a go. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.