stuntman Posted December 23, 2009 Share Posted December 23, 2009 Hello one and all, this is a dumb question but I thought I'd ask as I've not opened the packs yet. I've bought a set of tree sliders for a 110 from Paddocks. Not my question is, does the floor screw into it? also how does the b pillar attach to it?. Oh and I'm awaiting delivery of my new Raptor Engineering dash and replacement cb I'll let you know how it turns out, but let me just say, it looks very cool! Quote Link to comment Share on other sites More sharing options...
Orange Posted December 23, 2009 Share Posted December 23, 2009 AFAIK the body/pillars/floor do not attach to the sliders at all. They bolt on to the outriggers from the chassis... Quote Link to comment Share on other sites More sharing options...
bushwhacker Posted December 23, 2009 Share Posted December 23, 2009 What Orange has already said is right. I went down that road a few years ago. Just take what ever you are putting on have a look at it and where it needs to go. It should all be self evident. Make sure you have replacment bolts, nuts and washers to hand, the old ones will be well corroded/rusty. BTW I am still putting stuff on taking stuff off several years down that road. Have fun! I still am. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.