Phil Posted January 4, 2010 Share Posted January 4, 2010 I have an '02 110 CSW which appears to have a couple of bits missing! About halfway down the inner face of each B-pillar is a vertical slot cut-out to (I assume) give access to the fixings for the upper hinge of the rear door. Immediately above and below this slot is a hole which has a thread behind as though something should be fixed there. What's missing and what's the part number(s)?? Many thanks, Phil. Quote Link to comment Share on other sites More sharing options...
western Posted January 4, 2010 Share Posted January 4, 2010 nothing missing they are all like that, least my genuine 1989 110CSW is, some early 110CSW had a full width grab handle for the rear seat passengers BUT it stopped the front seats from moving backwards & the seat back rest from reclining. the grab handle was also fitted to Series 3 station wagons, so the threaded bolt holes are a left over as the body side frames are/were used on both models. Quote Link to comment Share on other sites More sharing options...
jules Posted January 4, 2010 Share Posted January 4, 2010 What a Land Rover with a random hole in Quote Link to comment Share on other sites More sharing options...
Phil Posted January 4, 2010 Author Share Posted January 4, 2010 Ah, thanks, Ralph; no need to add to my 'to-do' list! Quote Link to comment Share on other sites More sharing options...
western Posted January 4, 2010 Share Posted January 4, 2010 happy to help & make the list a touch shorter. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.