SXPHIL Posted April 16, 2010 Share Posted April 16, 2010 WHAT do you suggest WERE from what lights Quote Link to comment Share on other sites More sharing options...
fozsug Posted April 17, 2010 Share Posted April 17, 2010 I got mine from http://www.ppcages.com/index.php?Rollcage=disco But gaurdian do one as well http://www.guardianoffroadproducts.co.uk/component/option,com_virtuemart/page,shop.product_details/flypage,shop.flypage/product_id,14/category_id,10/manufacturer_id,0/Itemid,11/ As for lights depends what you want from them, long range driving, spot, fog etc. There is alot of choice out there http://b2c.hella.com/b2c_hella/b2c/init.do?language=en&country=en&shop=de_com&scenario.xcm=hella_com http://www.lightforce.net.au/products/driving-lights http://www.x-eng.co.uk/X-LiteAZ.asp Hope this helps Tony Quote Link to comment Share on other sites More sharing options...
SXPHIL Posted April 17, 2010 Author Share Posted April 17, 2010 Very helpfull thanks Quote Link to comment Share on other sites More sharing options...
SXPHIL Posted April 17, 2010 Author Share Posted April 17, 2010 Where do people take the wires into the car? Quote Link to comment Share on other sites More sharing options...
davie Posted April 17, 2010 Share Posted April 17, 2010 I can recommend 4 x lites on light bar, thats what i have on my defender. 2 x spot and two fog/flood types. I have the two spots wired to come on with main beam and also with a seperate off switch so its main beam only. The two fogs i have wired in just to be an on/off switch for either off road or i use them as work lights at the front. All of the azmouth type. Drilled a hole in roof to take wires in, lots of sealant and its fine. Quote Link to comment Share on other sites More sharing options...
SXPHIL Posted April 17, 2010 Author Share Posted April 17, 2010 Cheers for that Quote Link to comment Share on other sites More sharing options...
fozsug Posted April 18, 2010 Share Posted April 18, 2010 Same as Davie, Dilled a hole in the roof above the A pillar and run cables down A pillar behind plastic trim, so the end up right where you want them , by the fuse box and all wires fron healights etc. Make sure to use relays for youre new lights and right amperage cables. Quote Link to comment Share on other sites More sharing options...
SXPHIL Posted April 7, 2011 Author Share Posted April 7, 2011 Thanks guys for all your help Got the bar and then made the mistake of going cheap on the lights !!!! They were Carp Now have a delivery of X ENG arriving today Quote Link to comment Share on other sites More sharing options...
SXPHIL Posted April 12, 2011 Author Share Posted April 12, 2011 Will take some night shots later Quote Link to comment Share on other sites More sharing options...
SXPHIL Posted April 12, 2011 Author Share Posted April 12, 2011 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.