Jimmy Two-Jacks Posted June 22, 2010 Share Posted June 22, 2010 On Sunday my drivers door decided to play –up and as a result I managed to snap the interior lock release lever off (doh ) Does anyone know if any of the early disco release levers might fit my D reg 90 or were I can get a replacement already tried fleabay. Got off to a bad start but started removing the corrosion on the body of the 90 pre the paint-up and used a grit blaster with mixed iron slag and glass it worked very well and I was able to feather the edges so not too much papering back was needed .It worked well with my small 3hp compressor and a hand held hopper blaster it saved me a lot of time. If you have got a fair amount of oxidation I can recommend grit blasting. Cheers Quote Link to comment Share on other sites More sharing options...
scube Posted June 22, 2010 Share Posted June 22, 2010 I would say a Range Rover Classic door release catch (the bit you pull to get out) Will do the trick nicely. Cheers Mark Quote Link to comment Share on other sites More sharing options...
Jimmy Two-Jacks Posted June 22, 2010 Author Share Posted June 22, 2010 Cheers Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.