geldy Posted June 25, 2010 Share Posted June 25, 2010 hi as any one had to get in to the electic moter housing to change bushes,i have got so far just wondered if the end plate seperates, its a db 1200i, : Quote Link to comment Share on other sites More sharing options...
jbs Posted June 26, 2010 Share Posted June 26, 2010 No idea to be honest but when you put Britpart I said Oh Dear Quote Link to comment Share on other sites More sharing options...
geldy Posted June 29, 2010 Author Share Posted June 29, 2010 hi ive took motor of hears a couple pics any one any idea witch end i get into to change bushes or the motor itsekf cheers dave Quote Link to comment Share on other sites More sharing options...
geldy Posted June 29, 2010 Author Share Posted June 29, 2010 and the other pic, Quote Link to comment Share on other sites More sharing options...
errol209 Posted June 29, 2010 Share Posted June 29, 2010 and the other pic, The brushes will be at the non-shaft end, but the end plate will be holding the rotor central in the magnet assembly so don't go pulling it off just yet! I notice that Britpart don't list brushes as spares - do already have them? Are there two screw-in covers / plugs directly opposite each other, about 2-3cm in from the "back" end? If so these are probably the access to the brushes. If not, then I have no idea at all Quote Link to comment Share on other sites More sharing options...
rusty_wingnut Posted July 1, 2010 Share Posted July 1, 2010 looks very similar to a Tmax, replacment motors are available from Mail Order4x4 Quote Link to comment Share on other sites More sharing options...
geldy Posted July 1, 2010 Author Share Posted July 1, 2010 cheers for that the team at britpart have emailed me the instuctions of how to dismantle it the lads graham & steven at britpart are being very helpfull, Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.