Marco Posted September 22, 2010 Share Posted September 22, 2010 Hi, Investigating the DIY rebuild of a LT77, have started yesterday but did not come that far, 1st problem main shaft collar. Question, which tools are needed / suggested to strip the box without buying official (way to expensive) workshop tools. e.g. universal bearing puller etc. Cheers Marco Quote Link to comment Share on other sites More sharing options...
Jon White Posted September 22, 2010 Share Posted September 22, 2010 The main shaft collar is a piggy! You really need the special tool, but you may get away with a proper bearing puller. Otherwise its all pretty stnadard tools - circlip pliers, spanners, bearing puller etc etc. The difficult bit is shimming it all correctly and you'll need a DTi to allow you to measure the endfloats. Jon Quote Link to comment Share on other sites More sharing options...
Aragorn Posted September 22, 2010 Share Posted September 22, 2010 Theres a really well documented rebuild thread on the forum somewhere, well worth a look/read. Quote Link to comment Share on other sites More sharing options...
Marco Posted September 22, 2010 Author Share Posted September 22, 2010 Theres a really well documented rebuild thread on the forum somewhere, well worth a look/read. Thanks, have found this one: LT77 Cheers Marco Quote Link to comment Share on other sites More sharing options...
Aragorn Posted September 22, 2010 Share Posted September 22, 2010 yep thats the one. He has pics of most of the "special" tools you need/tricky bits to dismantle from what i can remember. Quote Link to comment Share on other sites More sharing options...
Marco Posted September 22, 2010 Author Share Posted September 22, 2010 Yes just studied thread and this might be one bridge to far for me... Especially because of the lack of tools and proper workshop space.... Cheers Marco Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.