CBolton Posted January 9, 2011 Share Posted January 9, 2011 Hi...started changing mysuspension for a 2" lift...on removing the spring I noticed that the hole in the middle of the spring seat had become tear drop shaped....should I replace the seat ? Quote Link to comment Share on other sites More sharing options...
Disco-Ron Posted January 9, 2011 Share Posted January 9, 2011 Thge bit thats worn is actually the axle, not the seat........ looks like the rubber on the shock pin wasn't located right, just make sure you get it right when you re assemble and i expect it'll be fine... Quote Link to comment Share on other sites More sharing options...
Bowie69 Posted January 9, 2011 Share Posted January 9, 2011 This is quite common, normal fix is to weld a washer over the hole. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.