zim Posted January 19, 2011 Share Posted January 19, 2011 Evening, I'm looking for a source for some clevis' to go on the end of my steering ram. 3/4 UNF, i wish to put a 3/4 rosejoint into them. Not sure where to be looking ??? Cheers Gordon Quote Link to comment Share on other sites More sharing options...
fozsug Posted January 19, 2011 Share Posted January 19, 2011 Try here http://www.medwaypt.co.uk/MPT_Clevises.pdf we use them for clevis joints for gas struts HTH Tony Quote Link to comment Share on other sites More sharing options...
zim Posted January 20, 2011 Author Share Posted January 20, 2011 Cheers, but this is the sort of thing i'm after : http://www.pscmotorsports.com/-SC16-Large-Steering-Cylinder-Clevis-End.html Quote Link to comment Share on other sites More sharing options...
mick the digger! Posted January 20, 2011 Share Posted January 20, 2011 thanks for the link fozsug, was looking for stuff like that a while ago @ zim...they run upto m30! they could be modified to be the same as the psc ones, would all depend on price the psc ones are spendy! I made somthing similar a while for the end of a ram by using a 50mm long piece of 40mm solid square stock, drilled lengthways with a Allen head bolt sunk it to it, and two 8mm plates creating the clevis...make sense? Quote Link to comment Share on other sites More sharing options...
Vit rich Posted January 21, 2011 Share Posted January 21, 2011 http://www.trail-gear.com/double-ended-rams They ship to the Uk for pretty decent prices aswell. Or these, but there metric and quite abit larger! http://cgi.ebay.co.uk/CLEVIS-27-X-2-MM-PIN-SIZE-28-MM-HYDRAULIC-ROD-END-/110513703658?pt=LH_DefaultDomain_3&hash=item19bb214aea#ht_500wt_922 Rich Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.