stuck Posted March 31, 2011 Share Posted March 31, 2011 Gent's, The CCV truck I'm building is almost complete thanks to a lot of help from here What I hope will be my last question is this: in the middle of the servo vacuum hose there is a "T", the centre part of which has a port with an I.D. Of approx 2mm, where the hell does this go? Engine and box is from a RRC post '90 RRC auto. Thanks once again, Mick. Quote Link to comment Share on other sites More sharing options...
miketomcat Posted April 1, 2011 Share Posted April 1, 2011 It goes to the heater there's a vacuum operated piston that closes the flap for air intake iirc. If its the plastic pipe the warm it remove the t and put a bit of correct size tube in unless your using the heater [:-)] Mike Quote Link to comment Share on other sites More sharing options...
Range Rover Blues Posted April 1, 2011 Share Posted April 1, 2011 Never come accross such a thing but I'd agree you don't need it. in my experience the heater vacuum comes form a differnet tapping on the plenum. Perhaps this was cheaper? Quote Link to comment Share on other sites More sharing options...
stuck Posted April 2, 2011 Author Share Posted April 2, 2011 Cheers chaps. Certainly don't need wussy things like heaters so I'll just blank it off. Another step closer! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.