tpb Posted May 12, 2011 Share Posted May 12, 2011 I have a 1998 Discovery 1 NAS with a 4.0L v8. The crank pulley is badly grooved - the crank seal was replaced, but it's still leaking a lot of oil. I think it's time to replace the crank pulley (and the seal, again). I'm having a hard time finding a part number for this. Can anyone help? Quote Link to comment Share on other sites More sharing options...
western Posted May 12, 2011 Share Posted May 12, 2011 have a look on this page http://www.numcat.ru/landrover/p/32/45622/ Quote Link to comment Share on other sites More sharing options...
tpb Posted May 12, 2011 Author Share Posted May 12, 2011 have a look on this page http://www.numcat.ru...ver/p/32/45622/ ETC7340 - 3.5L v8 ERR3442 - 3.9L v8 from 1994-95 Thanks to your link, I did find this: http://www.numcat.ru/landrover/p/33/46130/ I *think* the engines were fairly similar for the first few years. Does anyone know for sure? LHG000060 LHG100670 (some sites say it's superceeded by LHG000060) I also found ERR7373 as a possible part number. It seems that these parts run for around 230 quid! Quote Link to comment Share on other sites More sharing options...
western Posted May 12, 2011 Share Posted May 12, 2011 LHG100670 says here it's for a 4.6 V8 LHG000060 CRANKSHAFT PULLEY 4.0 & 4.6 (G) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.