2drdan Posted August 3, 2006 Share Posted August 3, 2006 So I'm stuck again...any ideas on the following?? I need a pulley for a 200 Tdi PAS pump, it has two v-grooves as far as I can tell. Problem is as 200 not made any more it's a genuine part job and they want £90 ...... ug... So far ringing a couple of people reveal no salvage, of course the hunt continues but if anyone has one or knows of a scrap Disco with one I'd be grateful of the info!! Phil Quote Link to comment Share on other sites More sharing options...
Tonk Posted August 3, 2006 Share Posted August 3, 2006 i'm assumin u mean disco cos the defender is a single grooved pulley, last one i bought was off ebay...... Quote Link to comment Share on other sites More sharing options...
2drdan Posted August 3, 2006 Author Share Posted August 3, 2006 Yup, should've said....Disco 200Tdi going in to my RRC 2dr, Cheers. Quote Link to comment Share on other sites More sharing options...
Bull Bar Cowboy Posted August 3, 2006 Share Posted August 3, 2006 3.5EFI RRC uses a twin V pulley on the PAS pump ……… might even be the same part ? Ian Quote Link to comment Share on other sites More sharing options...
Guest diesel_jim Posted August 3, 2006 Share Posted August 3, 2006 it's ETC7528. used on 200 disco & RR. Looking at microcat, the 3.5 has a 2 piece pulley, and it depends on what spec as to which pulley is used (the police have one all to their own... greedy buggers. it must give better PAS response so they can steer and eat doughnuts at the same time! ) Quote Link to comment Share on other sites More sharing options...
2drdan Posted August 3, 2006 Author Share Posted August 3, 2006 it's ETC7528. used on 200 disco & RR.Looking at microcat, the 3.5 has a 2 piece pulley, and it depends on what spec as to which pulley is used (the police have one all to their own... greedy buggers. it must give better PAS response so they can steer and eat doughnuts at the same time! ) Ah Ha the elusive part no. Cheers. Quote Link to comment Share on other sites More sharing options...
Tonk Posted August 4, 2006 Share Posted August 4, 2006 theres one here Quote Link to comment Share on other sites More sharing options...
2drdan Posted August 4, 2006 Author Share Posted August 4, 2006 theres one here Cheers, i keep forgetting to look there! I've got a new pump on the way so will see what happens to the price of this set up..... Phil. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.