Dave W Posted January 12, 2012 Share Posted January 12, 2012 I'm considering adding a fuel pressure gauge, at least on a temporary basis, to my TD5 conversion as I'm not convinced the pump is coping in full throttle conditions. I'm using the same pump I use on my 5.7 V8 petrol engine and it seems to cope fine on that so it's probably just paranoia but it'd be good to know for certain what's going on if only so I can look elsewhere. Anyway, the best place to put the gauge would be between the fuel filter (a 300TDI fuel filter housing) and the fuel rail input. Does anyone know what size thread the output or the input(s) are on a 300TDi fuel filter housing ? Quote Link to comment Share on other sites More sharing options...
vulcan bomber Posted January 12, 2012 Share Posted January 12, 2012 1/2 inch unf comes to mind... This may or may not be useful: http://www.lro.com/forum3/viewtopic.php?f=18&t=72806&p=652966&hilit=thread+size#p652966 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.