ukspike Posted February 6, 2012 Share Posted February 6, 2012 Don't really want to ask this question but I have to, We where all day yesterday off roading, playing about a bit like you do in the snow and frozen ground, did about 70 miles, got home and parked up all nice and safely, the wife ask me early this morning if it was ok to take the truck on the school run, yes of course dear I will just turn it round on the drive for you so you haven't got to back down our quite steep twisting drive, next thing that's happening right at the bottom of the drive while I'm backing it down, it slips sideways strait into one of the trees each side of the drive, So question is, how easy is it to remove old bent wing and replace it with a new one, do they remove easily. I so wish it was not having to ask this question. Spike Quote Link to comment Share on other sites More sharing options...
Retroanaconda Posted February 6, 2012 Share Posted February 6, 2012 Front wing or rear wing? Front one is nuts and bolts (and perhaps a paint job). Rear one involved drilling out of spot welds and riveting a new panel in place. Quote Link to comment Share on other sites More sharing options...
ukspike Posted February 6, 2012 Author Share Posted February 6, 2012 Silly me, forgot to say, of side front, where's the best place to get one from, and not plastic. Spike Quote Link to comment Share on other sites More sharing options...
Frax Posted February 6, 2012 Share Posted February 6, 2012 Here are some http://www.ebay.co.uk/itm/Land-Rover-RH-Defender-Outer-Front-Wing-300tdi-94-98-/280809309697?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item41618a0601#ht_1758wt_1187 http://www.ebay.co.uk/itm/Land-Rover-LH-Defender-Outer-Front-Wing-300tdi-94-98-/250976295081?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3a6f5a58a9 Frax Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.