New wing fitting

[ukspike]

Don't really want to ask this question but I have to, We where all day yesterday off roading, playing about a bit like you do in the snow and frozen ground, did about 70 miles, got home and parked up all nice and safely, the wife ask me early this morning if it was ok to take the truck on the school run, yes of course dear I will just turn it round on the drive for you so you haven't got to back down our quite steep twisting drive, next thing that's happening right at the bottom of the drive while I'm backing it down, it slips sideways strait into one of the trees each side of the drive, So question is, how easy is it to remove old bent wing and replace it with a new one, do they remove easily. I so wish it was not having to ask this question. Spike

[Retroanaconda]

Front wing or rear wing?

Front one is nuts and bolts (and perhaps a paint job). Rear one involved drilling out of spot welds and riveting a new panel in place.

[ukspike]

Silly me, forgot to say, of side front, where's the best place to get one from, and not plastic. Spike

[Frax]

Here are some

http://www.ebay.co.uk/itm/Land-Rover-RH-Defender-Outer-Front-Wing-300tdi-94-98-/280809309697?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item41618a0601#ht_1758wt_1187

http://www.ebay.co.uk/itm/Land-Rover-LH-Defender-Outer-Front-Wing-300tdi-94-98-/250976295081?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3a6f5a58a9

Frax