Tetsu0san Posted March 29, 2012 Share Posted March 29, 2012 Hi all I have a mounting bracket and pulley tensioner from an air con setup from a 300Tdi which had been used to run a second alternator. I want to do the same thing on a 200Tdi but I can't see any easy route in doing this. Has anyone out there done this and could share any pictures? Many thanks. Quote Link to comment Share on other sites More sharing options...
zardos Posted March 29, 2012 Share Posted March 29, 2012 Gwyn Lewis has done mounts for most types of engines see his ebay shop and buy the right kit for your engine. Quote Link to comment Share on other sites More sharing options...
Tetsu0san Posted March 29, 2012 Author Share Posted March 29, 2012 I don't really want to buy a kit as I already have most of it (it was a complete kit on a 300Tdi). Just wondered if it was possible utilising the 300Tdi bits I have and a little bit of jiggery pokery Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.