landrover598 Posted August 29, 2006 Share Posted August 29, 2006 Where the airline goes through the diff casing into an ARB / Rover diff ? Just need to make sure i'm in the right place before i drill Quote Link to comment Share on other sites More sharing options...
Guest diesel_jim Posted August 29, 2006 Share Posted August 29, 2006 Taken from D-90 how to install ARB lockers lots more pics and tech info on there too. Quote Link to comment Share on other sites More sharing options...
JST Posted August 29, 2006 Share Posted August 29, 2006 just guess! as long as its not on the crown wheel side and try to ffind a flat spot to go through. forgot to add - tap it slowly as well with lots of copper slip or similar, snapping a tap off in the diff is a real PITFA!!!! dont ask! Quote Link to comment Share on other sites More sharing options...
white90 Posted August 30, 2006 Share Posted August 30, 2006 Quote Link to comment Share on other sites More sharing options...
landrover598 Posted August 30, 2006 Author Share Posted August 30, 2006 Excellent Thanks B) Quote Link to comment Share on other sites More sharing options...
JST Posted September 1, 2006 Share Posted September 1, 2006 Dave, not sure if youve done it yet but here some phots of where holes in two of my diffs went: first two are the same one. Quote Link to comment Share on other sites More sharing options...
landrover598 Posted September 1, 2006 Author Share Posted September 1, 2006 Thanks, i put the fitting in this evening, just got to finish building the rest of the diff, and then rebuild the axle Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.