mcc1979ian Posted July 11, 2012 Share Posted July 11, 2012 ok so the LT77 arrived late this afternoon for my V8 plans so iv spent the evening mounting the transfer box back on and getting the lot flushed with fresh oil, but iv been standing looking in puzzlement at the main shaft, it only sticks out past the bellhousing by approx 1/2 to 3/4 inch and im not sure if thats correct, any suggestions? Quote Link to comment Share on other sites More sharing options...
ejparrott Posted July 12, 2012 Share Posted July 12, 2012 Measure the drop from the face of the flywheel housing to the spigot bush Quote Link to comment Share on other sites More sharing options...
mcc1979ian Posted July 12, 2012 Author Share Posted July 12, 2012 ah ok thanks will try that later Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.