ra08 Posted January 20, 2013 Share Posted January 20, 2013 hi my 300 tdi discovery jap import central locking has died,the single button remote has not worked since i dropped it in water years ago.However it locked,unlocked ok with the key untill now,whenever you try the key the whole system is dead so far i have only tried the fuse which is ok any thoughts or ideas would be welcome thanks Quote Link to comment Share on other sites More sharing options...
teabag Posted January 21, 2013 Share Posted January 21, 2013 There's micro switch on the back of the drivers lock barrel operated by a plastic cam, this or the switch have been known to break so you need to have the door card of for a look-see if yours is ok or not.. Quote Link to comment Share on other sites More sharing options...
ra08 Posted September 29, 2013 Author Share Posted September 29, 2013 Ok iknow it has been a while but i have finally got time to sort this out operating the micro switch on the door lock by hand does nothing,if the fault is in the main control unit the drivers door or a faulty micro switch is it possible to check these components.or does anybody know of a link to a fix for this problem thanks Quote Link to comment Share on other sites More sharing options...
teabag Posted September 30, 2013 Share Posted September 30, 2013 Do the doors lock/unlock when you push down ot pull up the door pin. The CL is part of the alarm ECU which have been known to go faulty, it can be found at the side of the glove box. I understand there are two switches in the door one CL the other Alarm. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.