ajh Posted May 28, 2013 Share Posted May 28, 2013 I have a 200TDI and the high-pressure line attaches to the rear of the steering pump with a banjo bolt which the line then connects to. The banjo is sealed to the pump using two steel/rubber hydraulic sealing washers. Does anyone know the size/part number of these? Quote Link to comment Share on other sites More sharing options...
ajh Posted May 28, 2013 Author Share Posted May 28, 2013 Subsequent searches (not using microcat) show it as RTC5675 but no indication as to size. I'll have to source it at a hydraulics place in town; which means driving there so knowing the size in advance would be helpful since I'll have to remove it in the parking lot; and if they don't have one it's 2h of driving plus a refill of the reservoir. Quote Link to comment Share on other sites More sharing options...
western Posted May 28, 2013 Share Posted May 28, 2013 Brit-car link has a photo with a rule under it http://www.brit-car.co.uk/product.php/91272/0/dowty_washer_pas_pump not dead accurate but it'll give you a good idea of the outer & inner diameters. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.