=jon= Posted December 31, 2014 Share Posted December 31, 2014 Hi, I've just bought Paul's (HoSS) megasquirted 110, and I'm having a few teething problems with the software... I've downloaded Tunerstudio, and MegaTune 2.25. If I run MegaTune, it throws up loads of errors about expecting an MS2, but found a something else - to fix this is it just a case of picking the closest match in the .ini file? In Tunerstudio it connects OK and I can read/write the settings, but I'm having a few issues with some of the 'advanced' features. The 110 has LPG, with a feed to ECU pin 5 that goes high when the LPG is active, which should switch to the alternate fuel/spark tables. This appears to be working, however Tunerstudio seems to think the contents of these is the same as the primary tables - where the fuel values should be blanked, and a different spark table. I also don't see the 'Application Indicator' to show that the alternate tables are selected, and it won't let me add it (there's no NOS/Tables wotsit as per: http://forums.lr4x4.com/index.php?showtopic=85718&p=745416) I'm guessing there's some config that needs to be done in the software to tell it that it needs to read in those maps and enable the functionality, but I can't seem to figure it out... The steps I followed were to create a new project, then connect it to the ECU and allow it to read the settings in... Any pointers? The LPG map switchover is working OK, but I can't see the proper settings! Thanks Jon Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.