kevin50

Fantastic Mate I'll get that done tomorrow. Think you are Right think we are nearly done, apart from a couple of the small bulbs behind the dial's, unless you can think of anything else. Been Dreading this since I started 2 year's ago and you have helped me all the way through it Mate, Can't Thank you Enough.

Thanks , Think I understand it, Just to rectify I have only fitted 1 Reverse light on the left side, Is that OK or should there be 2 ?. So 1 wire from Switch to Green at Multiplug then another from Switch to my Green/Brown Bullet ? Please forgive me if that sounds stupid .

Found my Difflock wire, the bloody thing was staring me in the face, it had been taped up on side of Loom, Extended it straight to switch, changed the old earth on it as it was very brittle, Ignition on put in to Difflock and Light worked Perfect. Another Job Done. Think Ive found 2 of the wires for Reverse But still not sure where they connect, Sorry. Have arrowed them in pic.

Will have a good look tomorrow. Thanks Again

Thanks. Found this old Pic before it was tidied up, and can see a Black/Blue going up in to this plug, Could that be the Difflock Switch wire ? will try and follow it tomorrow

Cheers Mate will Tackle those one by one. On revers switch, if I don't find wires, Could I just do how I tested it, run 1 to bulb at rear and 1 to Battery live, ? I can just say get to Diff Lock switch, at least I Think its that. as Ive left tops off seat box until its all sorted. in pic, it has an Earth on it but nothing else, will look for the Black/ Blue where you said, cant remember seeing one though.

Great Info Mate, Just what I need. I used the Darker Green/Brown and earth to Light. Cant find any of the wires at bulkhead yet, There was no wires on my switch in pic, so I mocked 2 up to Test the Light , ran one to rear on to bulb, then the other to Battery , put it in reverse and works Fine. so need to find these wires.

On the top NOT Working is park brake, brake fail, centre diff lock, rear heated screen. On the bottom NOT Working is seat belt, park brake, gearbox temp, side lights, 24 watt batt.

Pic of panel. Just fitted Reverse Lamp, but the Diagram says Green / Brown, I have 2 but think one may be Light Green / Brown Not sure. Also I have New reverse Switch on gear box, but there is no wires coming from it, Not sure where to look for them, or what colour the live is.

Thanks Mate, Will I need them ?

Another thing I noticed was these Small Bulbs in the Binicle with spade connectors , I can see what they are for on the front but can only see one set of wires for one of them. Do they all have to be Connected ?

Might try the checker plate, just to tidy it up till later date. Not bothered how it looks as on inside, but will try and cut it out and make decent for now.

Yes Mate Ive got one of them somewhere. I will have to Run the front windscreen tube along to the right side too.

Just about ready to fit Rear Door on my Rebuild. Ran out of money , Out of work with this Situation we are All In, Hopefully we will all get through it. Anyway its not bad Really apart from one corner and bit in the middle. Is there any way I can fix this without having to pay for welding.

Great Thanks. Now with this conversion, I have put the bottle on the Right hand side down near front of wing, I have run one wire that way to reach the first pump. I also have put the Tube in the roof from Back Door, along the right side it reaches just about middle of door at front, so need to connect some more to reach bottle. By the Way , Mentioning Back Door mine is not fitted yet it might need a little bit of welding, but hoping to fix it without, will put pics up tomorrow of damage. but it has wiper and motor fitted which works as I tested it a while back.

Thanks Mate, You've been a Fantastic help through this. On the Left I have the Light green/black already wired to one of the washer pumps as I do have 2 on the bottle, there is a Black / Green left, could it be for the second Pump ?

Most of the Lights done now except Rear fog and Reverse, need to get some. LEFT SIDE 3 wires left on the Passenger side, green/red, blue/purple, and black green. Book says green/red for side indicator, I Think forgot the other 2 now, but Im sure one is for rear fog light but cant understand why its in the front engine bay., RIGHT SIDE, Pics of right side 2 plugs coming from same Loom with same colour wires, and a blue/purple on its own with spade connector. ,

Thanks One big thing I forgot was the Bloody Bulbs, will get a couple tomorrow.

Do you mean looking from the front . Just thought from what you said I can look at the Drivers side in pic and follow where Its wires go. https://www.halfords.com/tools/fuses-electricals-and-fixings/electricals/halfords-h4-bulb-holder-hef367-869628.html

Fitting Headlamps Got the bowls in, drivers side already has wires in but had to buy holder for passenger side. This is where Im stuck , wires on left are Blue / Pink and Blue / Slate, I have found these ready but the holder has 3 wires Blue, Red and Yellow , not sure which goes to which ?

One thing I did notice today My battery voltage Dial has stopped working for some reason, all fuses are ok, the needle used to move right over to other side, but does not move at all now.

Thanks Think I No I know where you mean is it these 2 but on the passenger side ? , It did look like the holes would match up but didn't have time to try it. will have a go tomorrow,

Not much done today, did get the lights fitted on the rear just drilled another couple of new holes and put self tappers in, done the job. Before I came away thought Id fit the horn as know where wire is for it , then I realized I aint got a clue where it goes, googled it but could only get that it goes up behind the headlight or behind front grill where rad is, but couldn't find any holes for the bracket.

Cheers Mate will be back at it tomorrow.

Great Mate thanks. Should I leave it till all are spoken for before taping them into a Loom, then fixing up out the way.