-
Posts
80 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by Stambecco
-
-
Thank you all very much. Right you are, I will source a new slave and replace both of them. 591231 seems to be the one.
Cheers.
-
Hello troops,
200Tdi 110 (1990 H) Slight dribble of fluid down the clutch pedal, I begun the procedure to replace the master cylinder, went to drain the slave with a tube etc. but nothing comes out at all when the pedal is pressed. The pot remains full, the cap is loose. The clutch functions perfectly so the pushrod must be working. Took the nipple out completely and it's dry, not blocked because I can see light through the hole.
Any ideas?
I expect it will be a case of draining it from the pipe and replacing the slave as well. Can't wait!
Thank you very much,
Julian.
Drivers Door Not Opening - Help please
in Defender Forum (1983 - 2016)
Posted
Hi,
I know this may sound stupid but give the outside handle a firm thump or two near the push button! I have had similar problems with mine. You may hear a click as the mechanism is freed, then you can strip the door to investigate. It sounds like it just needs a clean and some WD.
Good luck.