-
Posts
337 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by roybatty666
-
-
Hi All
Looking to do the old rear axel swap form a Disco to lose the drum brakes as I believe it is a straight swap (I have a nice transmission lft to help things along)
My question is if the Disco A frame is also interchangeable as mine is looking a little worse for wear and rather than restore it if I can get one with the Disco Axel that would be Ideal.
Thanks in adfvance and for all the really useful info on this forum, I have spent the last week reading it front to back.
Steve
-
Thanks, I would be interested in seeing some pics of your new tyres.
I was also thinking about insa turbo sahara's, but thought I'll go for something a bit more aggressive. And BFG Muds are a bit more expensive and I also want something a bit different.
Steve
They should be here on Wednesday,it's going to have a busy weekend as I have the wheels, rear prop, F4OR Tubular Shadow bumper + Superwinch and an indicator stalk to fit
-
I have some Sahara 31/10.5/R15 on 15x8 steelies coming in the next few days. I prefere a slightly widewr tyre as the arches on the defender need filling up! I will take somne piccies when I get them
I was a bit bored with BFGs and the Insa are a bargain so worth a punt, from pictures the tread looks pretty deep
I may also get some spacers to help the old steering lock, but not sure which to go for
-
Can I suggest that unless you plan on doing some serious mods to the motor, that the 6500 winch will not be appropriate for your truck.
Far better off getting the 9500.
Also, you might want to look for a snorkel that doesn't stick out of the side of the wing as they tend to loose in fights with trees etc. Southdown do a good one.
Was mainly a cost thing but I hadn't noticed that the 9500 is hardly any more expensive, 9500 it is
I was a little worried about the side mounted Safari but as it was the most popular and all the other wing cutting ones looked like something I could have made I went for that. The Southdown looks very neat and with it being on special this month it is no more expensive.
Cheers chap
-
Don't forget to put aside every scrap of spare money you'll have for the next five years to buy bits for it
Mo
That has well and truly started
So far I have purchased
Insa Turbo Saharas on black 8 spoke steelies
Rear Prop
Indicator stalk unit
Diff Guards
Ordering next week
Safari Snorkel
Guardian Winch Bumper
TDS 6500 Winch
Set of replacement doors
Then we have on the list of things to do
Rear Cross member
Wire brush down the chassis and axels and paint
Swap rear axle to Disco one to upgrade to discs
Fit Torson diff to rear axle
Small lift kit
fun fun fun
-
Steve,
I'd say you got yourself something of a result
Welcome to LR4x4
Mo
Cheers chap
I was in a right mood when I went to look at it as it took me 3.5 hours to do 51 miles (stupid road works) and with a screaming 10 week old baby for the last stretch of it.
Due to my mood I was a bit critical and down on it and made it out to be far worse than it was in my mind.
So was pleasantly surprised when I went to pick it up and saw it a second time. My mate who took me up in his 300tdi Disco was shown a fresh pair of heals as I nipped off, we were both surprised of how much quicker the 90 was, even with mew not giving it full beans due to the self consuming prop. I assume the 90 is a fair bit lighter than the Disco? i believe they have different diff ratios?
I just spent the last hour chopping bits of the inide of my garage door to get her to fit lol, I hope the new wheels and tyres I ordered doesn't raise her up any more!!!! and those portal axels (I wish) may have to wait
-
Hi all
I have been a bit of a lurker and have found some really great advice in the past so though I would post a hello and introducce my new baby
After a lifted Disco and my daily ride of a p38 RR HSE I have bought my first Defender as my dedicated toy
I think I have scored a good deal
White 1990 90 Van 200tdi conversion
she did 10k a year up to about 115k then from 2001 she has only covered 10k (sat in a garage for 18 months)
In the last 7 k the following has been changed
fuel tank
tdi conversion (40k miles with the engine being now on 44k)
refurbished diffs (now on 7k )
refurnished Tbox (now on 7k)
injectors
water pump
exhaust
Alternator
Battery
Swivels
Swivel housings
Rod ends
Front callipers
Front pads
Front Brakes
refurnished steering box
Power steering pump
Front propshaft
Rear A frame
Rear A frame ball joint
Panhard rod
radius arm bushes
Shock turrets
Steering column cv joints
5 New Tyres
So just a few things
Bad points are the rear cross member / bumper is rotted at the bottom under the tow hitch
Both Doors are hanging on by the door skin!
A few rusty bits on the top trim of the tub where the roof sits on it
The rear prop has shed a bush on one of the cv joints and is eating itself (the only mechanical part that wasn't changed!)
Body is tired, not one dent mind but could do with a bit of tidying but not that bothered as it is going to get a bit of a beating anyway.
So how much do you think?......
.......I got him down from £2250 to ....
.....£950
I am rather chuffed with that
Now to find some doors that dont flap about in the wind even when shut
I will post up some pics shortly
Steve
Defender 90 A-Frame
in Defender Forum (1983 - 2016)
Posted
I was thinking of changing the bushes to poly ones while I had the back off, and as I have 10 ton press at home getting the old ones out will be no problem. I even scarily bought a Radius arm bush insertion tool which has yet to come out the rapper!
I am a bit torn as to whether to swap diffs as mine were reconned 7500 miles ago.
The other option is to just use the diff in the new axel use the other for a locker convertion, although there can't be much of the diff that issued in the convertion? Surely they just nick the crown gear off it?