![](http://content.invisioncic.com/r226025/set_resources_10/84c1e40ea0e759e3f1505eb1788ddf3c_pattern.png)
Richy B
-
Posts
237 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by Richy B
-
-
Yep it's radio waves, happened to me twice in our freelander, pushed it round the corner and starts up fine, happens a lot in hospital car parks also, the off road shop gets a few calls a week with this very same question,
Although apart from pushing it round the corner I don't know what the answer is :0/
-
Hi Nige, can you drop me a P.M please ? I need to pick your brains :-)
I did try sending one to you but it wouldn't have it for some reason :0/ Cheers matey
-
Wifey treated me to a new torque wrench today for our anniversary :-)
It was the 1/2 30-300 Nm one, shelf price £79.99 with Trade card £49.99 I/she was dead happy with that
P.S. Happy anniversary dear x Ha Ha
-
I think there was a thread for this already ? But I couldn't find it :0/ ?
Anyhow, today's "trade card " bargain/Good deal is ---- the larger 1/2" 30-300 nm torque wrench, shelf price £79.99 with trade card £49.99 I reckons that's a good deal :-) especially as wifey brought it for our anniversary tomorrow x
-
Landy Andy, that's the jobby I have, was expensive but I'm sure if you researched the strut it might be cheaper ?? As I say thoughim happy wiv mine :-) yet again , just a shame it's not a std fitment :-/
-
I have a gas strut on mine and a swing away wheel carrier, no problems holding it open in the past couple of years, and I use the rear door forr a drop down shelf/cooker
Got mine as a kit from the overland show, but for the life of me I can't remember who sold um :-/
However a simple angle iron bracket on either end and a measure up of operating lengths combined with a trip to a breakers yard ( hatch back car ) should do the jobby and almost certainly cheaper that the kit from memory :0)
-
People's views even :0)
-
No, but I'm interested on propels views as I'm just about o do mine , must admit I've never noticed a truck wiv um fitted ?
-
Normal clothes washing powder in hot water, let it sit for a whilst, and a good rinse
-
X-lox or X-locks
-
The " Anti X Range" Anti pedal, Anti ignition, etc , I'll have one even I don't win this time 8-)
-
Hi all, I have acquired a very handsome walker turner pillar drill from a neighbour, I have cleaned up and all in fine order, but --- I need a key for the chuck , anyway of measuring/ counting to work out which one to find/ order please ?? I'm hoping there a std type thing but have no idea on these matters, it is Landrover related as it sits in my workshop with all my other landy bits 8-)
-
Off tomorrow night for a couple of days laning mid - north Wales 8-) happy valley and the likes off, looks and hoping like a bit of snow also if the predictions are right , will post up some pics on our return
-
So what "fine collectables" did we get today then ? I got a dog cage for £20 8-) I felt it was sure busy enough , probally helped by the afternoon sun ? But they GOTTA do something about the que to get in !! I think get a team of runners giving out the registration forms out as you start to que, then by the time your at the front hand over the form and ya cash - Bosh ya in :0) happy enough for sure though
-
We use a quick fist in our challenge truck , done three seasons now and not dropped out yet
-
Ha Ha 8-) yea probally ,I'm in a alveston red 90csw with roof rack , say hi if ya spot me ,
-
This Sunday 1st, whose going ?. I'm there with cooker n bacon rolls n Burgers this year :0)
-
A broken drive shaft ? Some can twist n break in a pattern that leaves occasional drive , not too much work to check um out
-
Yep, challenger 4x4 keep um in stock
-
Come on then ----- what's the scores on the doors from today 8-)
-
How about pneumatic dampers ? A type that you can remotely adjust the pressure to stabilise the truck , I don't know much on this subject but maybe worth investigating ?
-
A nightclub onsite the night before a comp !!! What could possibly go wrong ;0) I reckons Mr Kelly may even have his truck ready early that night to participate in the evenings activitys ??
-
I'll keep an eye out for you also :0)
-
What engine ? mines a TD5 CSW 51 plate, Big intercooler and a IRB remap , on a trip to Wales and laning 27mpg, driven any old how , If that helps .
Ptfe tape or not ?
in Tools and Fabrication
Posted
Hi all, I have purchased a gas welding set , all brand new pipes,gauges, flash back etc, I know the gauges screw direct into the bottles, but do/ should I tape up the othe joints ?? Thanks in advance