[Waypoint List from a challenge needed]

hi

looks seriously good

do you think the software could be adapted to work on a apple g4 powerbook???

watson

[driverite/bures]

petergg will be there, as he runs the site

Steve

hi yea i no petergg qite well actually

watson

[driverite/bures]

hi is there any forum members going to hed down to bures pay and play day on sunday the 7th

watson

[Q plate]

looking at q plating my 90

now, how do i go about it ?

ive been told that i will need a fresh mot, and thats as much as i no on the subject

where do i apply for the big book of do's and dont's

im also worried about the emissions, they do check them right

what about the side exit exhaust and also the wing bars

have i opend a can of worms

dan

stop in a lay by on your way to the test station and rev the t**s off of it for a couple of minutes untill the black smoke clears!!

[Co-driver required]

hi is the post still open ???

watson

[Co-driver required]

hi i might be interested but im only 16 this tuesday

were abouts inj england are you from and whats the dealio???

from watson

[welders]

does anyone know if cebora are a good make

if so is this worth thinking about http://cgi.ebay.co.uk/Cebora-Bravo-mig-wel...bayphotohosting

[welders]

If I had £500 to spend on a welder I would seriously consider this.

It will give you a lifetimes use and, if you keep it clean, you will get most, if not all, your money back when you sell.

thankyou im seriously considering it

im trying to something similar to your truck on my truck have you got any advise???

and thankyou to any 1 who has posted advice but keep it comming

[welders]

hi thankyou for all the advise ive got a budjet of about £500 max were is the best place to buy second hand industrial welders???

and what sort of money are they??

my main reason for a welder is that im taking the body completely off my rangie bobtail and puting a cage on it with simple body work and i want to make up the cage myself !!

if there is any who has done this before and has any advise it would be most aprecciated

thankyou

[welders]

I have a SIP topmig 196 and it is perfectly able to weld cage mounts

never let me down, ok for the money and all I need t weld.

And Mount Bures was a stones throw from when I lived in Sudbury

lucily you have some good members fairly local to you

Petergg being the nearest

yeah i no petergg quite well actually

cheerrs for the advise

[welders]

hi

im looking for a welder at the moment, any got any advise im thinking a sip 195amp mig, would this be ok for welding up roll cages and other structural work and is sip a good make???

as you can guess im fairly new to this and im only 15 so any help wuold be much appreciated

thank from watson

[rangy 3.5]

hi

i think i found the problem it is the electronic ignition box playing

its had an after market electronic ignition which is carp

thanks for all of the replys

[rangy 3.5]

I had a problem last year on a 72 Range rover where the inside of the fuel filter was loose, and the fuel flow would lift it up and it would push against the outlet and block it off. Turning the car off and restarting it would get it going again because the filter element would drop back down. Took me a while to find out what was going on! Worth checking the condensor though if you are losing the spark.

hi i took the fuel filter out and tried it and it didnt make a difference but cheers any way

[rangy 3.5]

ok cheers i will check that out

would you be able to tell me it takes ages to start back up again

cheers

[rangy 3.5]

the fuel pump is fine its the engine thats cutting out but i was wondering wether it was because the pump is on constantly is it flooding the engine???

[rangy 3.5]

hi ive got i bobtailed rangy with the manual fuel pump you can see pics on my gallerie it has an electic manual pump but it likes cutin out in about 15 min intervils and i ahvnt clue why could any 1 enlighten me please