Jump to content

Mr Bean

Settled In
  • Posts

    428
  • Joined

  • Last visited

Posts posted by Mr Bean

  1. A car thief will always choose the easiest target....that means its someone else's problem...It doesn't stop the crime but it stops you being the victim.

    A hidden switch for the fuel stop solenoid is an easy mod to make if an immobiliser is to expensive. Or several hidden switches that need to be activated in a certain order?

  2. If you do have a crack at it take a few photo's along the way some of us sad people like to see engines in various states of repair.<BR><BR>A picture says a thousand words...

  3. I had a V6 and the fuel consumption was coming in at about 20mpg i have a Td4 which returns about 35mpg.

    The performance of the V6 is good but the reliability of the V6 let me down so IMHO its not much better than the 1.8, both are the K-series family and both have head gasket failure.

  4. This happened to me about 5yrs ago and i was quoted a charge of £2000 to repair.

    Then whilst i was deciding what needed to be done this happened...

    It really overheated!!!

    Dead8.jpg

  5. Fantastic workmanship you should be very proud of what you have made.

    From your pictures then when you removed the plastic front bumper you replaced the existing metal front mount with a new custom mount?

    Did you buy this new mount or did you make it?

  6. You need to think of how the gearing is calculated.

    The gearbox reduces rpm from the input shaft to the output shaft. The IRD's input rpm is from the gearbox this is then reduced again. The output rpm from the IRD goes to both front and rear axle differentials.

    It was this ratio between the front and rear axle differentials that caused the IRD to have issues. When the Freelander was made it was designed to feel like a front wheel drive car hence the front axle having a different ratio to the back.

    So back to your question you would need to know which axles were fitted to the car as well as both the axles and IRD had a gearing change. I understand it was done in 2000 when the model was revised with the td4 engine.

  7. I have used "Green Stuff" in the past and one day i was driving "enthusiastically" and by the end of the afternoon the pads were cracked :o

    I have not used them in the land rover but i personally did not rate them well at all.

×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy