Cornish Rattler Posted September 23, 2017 Share Posted September 23, 2017 Hi guys Is there such a thing as a 24 splined half shaft flange felt washer or does the std one do both as I have just come to fit a pair of new 24 spline rear half shafts and flanges to my 2a swb fitted with Disco1 Diffs 24 spline and I ordered the felt washers not thinking about the spline difference, if so can you give me the part number please Quote Link to comment Share on other sites More sharing options...
Jon White Posted September 23, 2017 Share Posted September 23, 2017 You don't use them. There is an o ring that sits on the 24 spline drive flange which seals against the centre cup. Quote Link to comment Share on other sites More sharing options...
Cornish Rattler Posted September 23, 2017 Author Share Posted September 23, 2017 1 hour ago, Jon White said: You don't use them. There is an o ring that sits on the 24 spline drive flange which seals against the centre cup. Are right does the o ring sit in the grove in the spline in the flange or on the outer to seal the cap Quote Link to comment Share on other sites More sharing options...
Jon White Posted September 23, 2017 Share Posted September 23, 2017 On the outer to seal the cap. Quote Link to comment Share on other sites More sharing options...
Cornish Rattler Posted September 23, 2017 Author Share Posted September 23, 2017 24 minutes ago, Jon White said: On the outer to seal the cap. Ok cheers Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.