defender dinky Posted September 24, 2017 Share Posted September 24, 2017 hi, working on the project this morning and tried to start engine for the first time to no avail couldn't get fuel to filter, anyway looking under neath at fuel tank and sender unit which is on the side of my tank with one spade connector in a white sleeve and one in a red sleeve and a earth connector in the middle I have three wires in the loom that can only go to the tank two white grey slate and one green/black where do they go , dd Quote Link to comment Share on other sites More sharing options...
western Posted September 24, 2017 Share Posted September 24, 2017 If you would like to do a search this has been covered a few times with my replies noting which wire goes where. = Quote Link to comment Share on other sites More sharing options...
defender dinky Posted September 24, 2017 Author Share Posted September 24, 2017 yes seen these and all images on google but can't find sender unit that looks like mine and I have no earth wire just two white/slate grey and one green/black its a 110 diesel btw should have said, dd Quote Link to comment Share on other sites More sharing options...
western Posted September 24, 2017 Share Posted September 24, 2017 have a look for a broken wire, there should be a tail in that sub loom, if not just make a new earth, I've used a female bullet connector squeezed tighter to fit on the ridge centre stud, its not a thread. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.