ianmayco68 Posted March 2, 2019 Share Posted March 2, 2019 Hi all , in a bit of a spot , was replacing the swivel ball bearing and upper pin got it all back together came to put the one shot grease in was merrily squeezing it in and and the bloody bag split and it went all over the floor. Not a lot went in so what else can I put in to get me by too I can get some as I need the motor Monday ? Should have brought a spare . Quote Link to comment Share on other sites More sharing options...
Maverik Posted March 2, 2019 Share Posted March 2, 2019 EP80W90 gear oil would work. Early trucks had this anyway. Just means if you're seals and swivel arent so new they may weep a bit. 1 Quote Link to comment Share on other sites More sharing options...
ianmayco68 Posted March 2, 2019 Author Share Posted March 2, 2019 (edited) You’re a star Maverik , mines a 200tdi I thought that would work but wanted to check just to be sure. I replaced the seal and balls are good. Edited March 2, 2019 by ianmayco68 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.