adge cutler Posted February 10, 2020 Share Posted February 10, 2020 Hello, I'm presently trying to bring new life to a very rotten Defender 300tdi RHD and wonder if anybody could point me to a drawing which would show the original positions of the plastic clips that push into the chassis. I will need to drill the holes in the chassis for all the different (single clips, smaller doubles and the large doubles) clips used for brake pipes fuel lines etc. and would like to locate them as per original. Hopefully such a drawing exists? Many thanks in advance. Quote Link to comment Share on other sites More sharing options...
western Posted February 10, 2020 Share Posted February 10, 2020 Only in the parts book, in the fuel & brake sections. I used some rubber sleeved stianless steel P clips secured with Tek screws. Quote Link to comment Share on other sites More sharing options...
adge cutler Posted June 14, 2020 Author Share Posted June 14, 2020 I've moved on to a point where I have finished pretty much all but the brake lines now. All the pipes I have removed were formed by a cowboy and nearly all clips have long since disappeared. Somebody out there must have photographs of the pipes in the correct form or be able to point me to a previous thread? Thanks in advance. Quote Link to comment Share on other sites More sharing options...
Peaklander Posted June 14, 2020 Share Posted June 14, 2020 90 or 110? I have some photos of a 110 CSW during chassis swap. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.