sgo70 Posted May 1, 2020 Share Posted May 1, 2020 (edited) I got my headliner all stripped down and I saw how most just scrape the foam and recover over the bottom layer of fabric but mine was pretty rough and falling apart. Wondering if anyone has tried coating theirs in fiberglass resin/mat or any other ideas. I don't want to spend $1000 getting one here to Canada. I only tried the drill for a second......bad idea lol. Thanks, Sean Edited May 1, 2020 by sgo70 Quote Link to comment Share on other sites More sharing options...
ballcock Posted May 1, 2020 Share Posted May 1, 2020 I have heard of people using resin or pva, how effective they are I don't know. When I recovered mine I used lining carpet which helped to reinforce it. To clean the foam of I just used a stiff brush and vaccum cleaner and use a good spray adhesive for whatever you cover it with. Quote Link to comment Share on other sites More sharing options...
reb78 Posted May 1, 2020 Share Posted May 1, 2020 I cant tell easily from your picture but i think you are going too hard on it. I would just recover onto what you have. Quote Link to comment Share on other sites More sharing options...
reb78 Posted May 1, 2020 Share Posted May 1, 2020 This was mine - Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.