Tobias Posted July 30, 2020 Share Posted July 30, 2020 Hi all, regarding a late 300tdi 90 (VA132...) It is supposed to have door handle 395037 as far as I understand. We intend to install central locking in the future and I was looking at handle FUB500060 which is supposed to fit 2A... which has central door locking mechanism. Anybody knows if it will physically fit the door of the 300tdi? The electrics for the central locking I assume I will figure out eventually, short term it is just to get it fitted with a normal barrel for key. Thanks Tobias Quote Link to comment Share on other sites More sharing options...
Maverik Posted July 30, 2020 Share Posted July 30, 2020 I think it will fit, but it's down to the lock type, is the present lock - do you use the ignition key for the lock or is it a smaller half size key? The early locks are 7pin tumbler (short key) - later handles the lock is the longer 14pin tumbler. The lock barrels aren't interchangeable. Quote Link to comment Share on other sites More sharing options...
Tobias Posted July 30, 2020 Author Share Posted July 30, 2020 so if it's short key now a new barrel with key is needed and then it should be fine? Thank T Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.