NicTheOrange90 Posted January 18, 2007 Share Posted January 18, 2007 Have an ex-MoD 90 FFR and it is a hard top. Just got back with a full ex-MoD soft top (hoops, canvas and roll bar) but just looked at my 90 and it does not seem to have the bracket to accept the roll bar. Is this normally part of the bulkhead or is it an extra bit that gets added on? Quote Link to comment Share on other sites More sharing options...
NicTheOrange90 Posted January 18, 2007 Author Share Posted January 18, 2007 Have called the seller who tells me he has left the two base brackets on his motor and will be sending them asap. do I need any thing else ? Quote Link to comment Share on other sites More sharing options...
NicTheOrange90 Posted January 20, 2007 Author Share Posted January 20, 2007 *********deleted ********** Quote Link to comment Share on other sites More sharing options...
PaulMc Posted January 20, 2007 Share Posted January 20, 2007 *********deleted ********** Nic, I've scanned Land Rover's Supplementary Parts Catalogues for Military 110 & Military Defender 110, you can download them from here - http://www.defender110.nightmail.ru/ I also have the Supplementary Parts Manual for the 90, which I haven't got around to scanning yet. The 90's roll-over bar and it's fittings are the same as the 110's. I hope this helps. Paul. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.