slayor2005 Posted November 8, 2021 Share Posted November 8, 2021 Hi i took out me parcel shelf which sits behind the center switch panel it had the cigarette lighter in it i put a switch for the rear wash wipe in and now can't seem to get it back in past the cables as they get in the way what have i done wrong do i cut out a hole to let them though the shelf and then cover with the half dome that fits straight behind. Quote Link to comment Share on other sites More sharing options...
Anderzander Posted November 8, 2021 Share Posted November 8, 2021 I seem to remember that there was a bit of metal framework back there, where the cutout in the lower dash panel was quite small - maybe you are catching that? How big is your switch ? I vaguely remember filing the dash panel on mine. Quote Link to comment Share on other sites More sharing options...
slayor2005 Posted November 8, 2021 Author Share Posted November 8, 2021 Hi Anderzander The rear of the two switches stick out by around 40mm and all the wires that will sit under the panel just all seem to get in the way now so it don't sit well how need it go before i removed that top shelf ??. Quote Link to comment Share on other sites More sharing options...
slayor2005 Posted November 8, 2021 Author Share Posted November 8, 2021 It seems that it may be named a dashboard shelf and not a parcel shelf. Quote Link to comment Share on other sites More sharing options...
Anderzander Posted November 8, 2021 Share Posted November 8, 2021 I am a bit confused as to what you mean. Do you have a photo ? Is the panel with the switches fitting flush to the dash ? Is it just that you can’t get the cover to fit in behind it ? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.