simonpelly Posted May 9, 2023 Share Posted May 9, 2023 Hi Folks, Looking to get the throttle cable adjusted correctly on our 110 300 Tdi. From the WSM: 1. Slacken throttle cable adjustment ferrule. 2. Hold throttle lever in fully closed position. 3. Adjust outer cable, by rotating ferrule, to give 1,57 mm (1/16 in) of deflection in the inner cable. 4. Check that throttle opens fully when the throttle is depressed. On step 3, is this deflection referring to that laterally along the length of the cable, i.e. the small amount of slack before the throttle on the FIP moves? As opposed to any side ways play in the cable which seems a fair amount to me. Thanks, Simon... Quote Link to comment Share on other sites More sharing options...
steve b Posted May 9, 2023 Share Posted May 9, 2023 42 minutes ago, simonpelly said: On step 3, is this deflection referring to that laterally along the length of the cable, i.e. the small amount of slack before the throttle on the FIP moves? That's it . They can unwind with vibration so a cable tie round the outer behind the adjuster helps Steve Quote Link to comment Share on other sites More sharing options...
simonpelly Posted May 9, 2023 Author Share Posted May 9, 2023 Hi Steve, Awesome. Thanks, Simon... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.