inchman Posted February 8, 2007 Share Posted February 8, 2007 Hello, my power steering pump on my 90 1990 2.5 td is leaking has anybody got a non leaking one for sale. cheers Gary Quote Link to comment Share on other sites More sharing options...
Pyrover Posted February 9, 2007 Share Posted February 9, 2007 1990 2.5TD... Ummm... that'll be a NTC8287 pump then? (same as an early 200Tdi) I do have a pump knocking around somewhere but I'm not sure if it's a NTC8287 or a ETC9077, I'll have to have a dig around and see if I can locate it. I think (but am not sure) that the ETC9077 is slightly longer than the NTC8287 so would be no good to you as your pulleys will no longer line up. Quote Link to comment Share on other sites More sharing options...
Pyrover Posted February 9, 2007 Share Posted February 9, 2007 I've managed to find the pump and it's the right type but unfortunately it's goosed, there's no banjo bolt and the thread for the bolt looks like it's been stripped (obviously why the bolt is missing). Sorry. Quote Link to comment Share on other sites More sharing options...
western Posted February 9, 2007 Share Posted February 9, 2007 Use NTC9070 same as the Defender 200Tdi. Quote Link to comment Share on other sites More sharing options...
Pyrover Posted February 9, 2007 Share Posted February 9, 2007 Use NTC9070 same as the Defender 200Tdi. Does the banjo bolt fit onto the NTC9070...? Only ETC9077 and NTC8287 both have a banjo bolt on the rear. Quote Link to comment Share on other sites More sharing options...
western Posted February 9, 2007 Share Posted February 9, 2007 No banjo bolt on this pump, one pipe slides over the stub pipe at the rear & other pipe has a connector that screws into the large hex bit on the body barrel. there's dofferent pipes/end fittings to match each type of pump. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.