markwindsurf Posted August 29, 2007 Share Posted August 29, 2007 Am just in the process of converting a 101 to 300tdi, does anyone know of an economical intercooler I can put into the engine bay either custom built or pre-built, at narrower than 460mm? Quote Link to comment Share on other sites More sharing options...
FridgeFreezer Posted August 29, 2007 Share Posted August 29, 2007 I'd go for wandering the scrapyard with a tape-measure, the weather's lovely for it too Quote Link to comment Share on other sites More sharing options...
Les Henson Posted August 30, 2007 Share Posted August 30, 2007 I got a 200TDi intercooler and flattened it down (95mm I think). Les. Quote Link to comment Share on other sites More sharing options...
markwindsurf Posted August 30, 2007 Author Share Posted August 30, 2007 Does the volume of the intercooler or inlet and outlet pipes effect the way the air moves through it or cools with it? I have the old 300TDI cooler from the disco so could install it but thought I might need the UUmph from a larger one, also the connections are a little awkward for direction, hence why I was thinking of looking for another. Quote Link to comment Share on other sites More sharing options...
markwindsurf Posted August 30, 2007 Author Share Posted August 30, 2007 I got a 200TDi intercooler and flattened it down (95mm I think). Les. Les, I assume you have welded the original holes over and cut revised holes in the base? Quote Link to comment Share on other sites More sharing options...
Les Henson Posted August 30, 2007 Share Posted August 30, 2007 All the pictures:- Les. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.