brozzy Posted October 2, 2007 Share Posted October 2, 2007 Hi all, I am in the process of fitting a 200tdi and LT77 box from a '92 Disco into my ex-V8 classic. The Rangie has the same box and t/fer but the Wiring loom on the engine has different plugs(they look like Caterpillar ones). I am wondering if anyone knows where ther is a wrecked Tdi Classic that would be willing to donate it's engine harness to this worthwhile project,for a fee of course. Matt Quote Link to comment Share on other sites More sharing options...
bishbosh Posted October 3, 2007 Share Posted October 3, 2007 You only need about 4 wires to run a 200TDi. No need to find another loom. All I did (with the help of a couple of grown ups!) was remove the EFI loom that was no longer needed and add in the extras for the TDi. It all looked pretty easy (as a spectator - electrikery is not my thing!) Quote Link to comment Share on other sites More sharing options...
stumpy2268 Posted October 3, 2007 Share Posted October 3, 2007 Brozzy, I'm running a 200TDI in an ex V8 classic also. Where are you based ? If you are anywhere near me, you are welcome to come over to get clues on how the wiring is achieved. However, as Bish says, it is very minimal in a TDI. Adrian. Quote Link to comment Share on other sites More sharing options...
nickm Posted October 3, 2007 Share Posted October 3, 2007 when i changed mine over i re-directed the feed from the coil to the diesel pump think that was the only thing that needed changing Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.