rob90 Posted November 11, 2007 Share Posted November 11, 2007 Hi Well just ordered two blend motors for the Range Rover and Im going to do this on thursday im off work till sunday 22.00 so hopefully got time on my side I have some usefull tips from an early post, But any advice or hints gratefully accepted please!!!!!!! Quote Link to comment Share on other sites More sharing options...
paintman Posted November 12, 2007 Share Posted November 12, 2007 I take it you've had the link to http://rangerovers.net There is a good section in 'Problems and Fixes' . Quote Link to comment Share on other sites More sharing options...
rob90 Posted November 15, 2007 Author Share Posted November 15, 2007 Well did the job today, Was'nt as bad as I was expecting but was a pain in the a**e, there were bits of the dash every where but all 3 changed in about 5 hours, The only advise I could give is patience lots of fags and selotape the screws to the screwdriver when refiting the blend motors Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.