draper40 Posted February 16, 2008 Share Posted February 16, 2008 Hey, My battery is fine and the lights work etc but when iturn the key there is not a noise!!! Any ideas? Thanks Peter Quote Link to comment Share on other sites More sharing options...
LandyManLuke Posted February 16, 2008 Share Posted February 16, 2008 Have you got 12v on the starter terminal? Have you got 12v on the solenoid terminal when you push the key to 'cranking'? Have you got a good earth? Have you disturbed any wiring recently? Quote Link to comment Share on other sites More sharing options...
jimmy_neutron Posted February 16, 2008 Share Posted February 16, 2008 As above check wire coming out of the back of the ignition switch for 12v when key is turned to the III position. Wire should be white with a red stripe. If you don't av 12v to chasis earth then try to engine earth. If nothing then it'll likely be the ignition switch. If you got 12v then check that you are getting the same 12v at the starter solenoid. If you are then the starter solenoid / motor is dead. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.