ThreePointFive Posted March 20, 2008 Share Posted March 20, 2008 Hi all, my rear breather managed to get melted by the exhaust near the connection to the axle, I have enough breather left to connect the two up again but I need to know how they do it originally, if anyone has a picture that'd be a great help. Basically just need to see where it goes from where it's cabled tied to the A frame (X in photo)) and somehow runs down to the axle. Any help appreciated. Would cable tieing it along the axle be ok, leaving the breather fairly taught but away from the exhaust, or would the axle articulation be an issue? Quote Link to comment Share on other sites More sharing options...
LandyManLuke Posted March 20, 2008 Share Posted March 20, 2008 Just cable tie it to the axle tube, leaving a large enough loop to allow the axle and a-frame to move without drawing the pipe taught. you should be able to your cable ties to get the loop to lay away from the exhaust. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.