kingdong Posted September 18, 2008 Share Posted September 18, 2008 Hi all does anybody have any pics of s11/111s engine bays fitted with a disco 200 tdi engine fitted as i need to fit a disco 200 tdi header tank and need a good place to fit it graham. Quote Link to comment Share on other sites More sharing options...
RobotMan Posted September 18, 2008 Share Posted September 18, 2008 I used a header from a Golf mounted over the back end of the engine from the bulkhead. Not quite the best pic nor exactly what you are looking for but may help. Quote Link to comment Share on other sites More sharing options...
Jon White Posted September 19, 2008 Share Posted September 19, 2008 I used the standard disco one and made a bracket to bolt it to the drivers side inner wing. I am running a defedner front end on mine however so there is a bit more room! Jon Quote Link to comment Share on other sites More sharing options...
kingdong Posted September 19, 2008 Author Share Posted September 19, 2008 cheers guys for your help i am going to fit the tdi header tank on the inner wing drivers side just need to make some brackets. graham. Quote Link to comment Share on other sites More sharing options...
kingdong Posted September 20, 2008 Author Share Posted September 20, 2008 Hi all fitted the tdi header tank today mounted it on an alloy plate which is mounted to the drivers side wing i also painted the header tank before fitting and painted the tdi air filter too. graham. Quote Link to comment Share on other sites More sharing options...
kingdong Posted September 20, 2008 Author Share Posted September 20, 2008 Hi allfitted the tdi header tank today mounted it on an alloy plate which is mounted to the drivers side wing i also painted the header tank before fitting and painted the tdi air filter too. graham. will post pics tomorrow. graham. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.