tango90 Posted April 28, 2009 Share Posted April 28, 2009 Had a search and dont seem to be able to find any previous posts on this subject. does a P38 have a pre-wired loom for a caravan power socket? Quote Link to comment Share on other sites More sharing options...
steve_d Posted April 28, 2009 Share Posted April 28, 2009 My 87 RRC had an extra connector in the loom behind the O/S rear light cluster. It would be a rather backwards step for the later vehicles to not do the same. Steve Quote Link to comment Share on other sites More sharing options...
Dave W Posted April 28, 2009 Share Posted April 28, 2009 As far as I am aware there are two connectors behind a small cover, LHS rear of the boot. The 12S power supply lines are controlled by the BECM (body control module). Quote Link to comment Share on other sites More sharing options...
Dave W Posted April 28, 2009 Share Posted April 28, 2009 STC8875 looks to be the LR part - 12S socket on one end, plug for the loom on the other. It includes a split charge module too and looking at the accessory fitting instructions it's quite involved beyond a basic plug it in and it works task as it first looked. There are some warnings though that it might not be suitable for 2000 on P38s so it might be cheaper and easier to use an aftermarket one. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.