tattoed Posted May 21, 2009 Share Posted May 21, 2009 Hi i have been offered four springs and dampers 2" lift off a defender 90, what im wondering is if they will fit on my disco. Or will i have to mess about with any welding. thanks Quote Link to comment Share on other sites More sharing options...
jcwcooper Posted May 21, 2009 Share Posted May 21, 2009 It would fit but the spring rates may not be ideal. Dave. Quote Link to comment Share on other sites More sharing options...
tattoed Posted May 21, 2009 Author Share Posted May 21, 2009 It would fit but the spring rates may not be ideal.Dave. ok thanks, they are pro comp springs and dampers Quote Link to comment Share on other sites More sharing options...
jcwcooper Posted May 21, 2009 Share Posted May 21, 2009 The dampers will be fine, as they are the same for 90/RRC/Disco 1, You could try the springs however you may find they are too soft for your disco on the other hand you may like it. Dave. Quote Link to comment Share on other sites More sharing options...
andyb Posted May 22, 2009 Share Posted May 22, 2009 A mate did the opposite, put a RR kit on a 90 also Procomp. It was fine. Plenty of flex. Quote Link to comment Share on other sites More sharing options...
nickm Posted May 22, 2009 Share Posted May 22, 2009 Disco standard springs are a lot stiffer than RRC ones Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.