lurch Posted May 24, 2009 Share Posted May 24, 2009 Hi all I am after some advice been searching and reading for hours.. What i want to do is get 33,s on the disco i just got and need to see what mods will need to be done here is what i had planned will it do the job. +2" springs 2" spring spacers 1" Body lift +5" Shocks 6 Deg Castor corected radius arms and trailing arms Adjustable panhard rod Wide ange propshafts Extended break lines 30mm Wheel spacers So if I do that will I be able to get 33's on it without having to hack out loads of the body and still be able to turn corners!!! Tyre is 305/70/16 or (33X12.5X16) If the 33's wont fit what size would you say would fit I am not the most technical person in the world so if you could give any responses in a easy to understand way Cheers Nathan Quote Link to comment Share on other sites More sharing options...
turbonutter Posted May 25, 2009 Share Posted May 25, 2009 Hi all I am after some advice been searching and reading for hours.. What i want to do is get 33,s on the disco i just got and need to see what mods will need to be done here is what i had planned will it do the job.+2" springs 2" spring spacers 1" Body lift +5" Shocks 6 Deg Castor corected radius arms and trailing arms Adjustable panhard rod Wide ange propshafts Extended break lines 30mm Wheel spacers So if I do that will I be able to get 33's on it without having to hack out loads of the body and still be able to turn corners!!! Tyre is 305/70/16 or (33X12.5X16) If the 33's wont fit what size would you say would fit I am not the most technical person in the world so if you could give any responses in a easy to understand way Cheers Nathan i should think with 4" lift and 1" body lift they should fit i had a 4" lift and 2" body lift on my disco with 37" boggers , mine is a 3 door and the arches have been cut lots tho u may have to cut abit from the arches is it a 5 or 3 door ? my missis has 33" on her 3 door rrc with a 4" lift and they fit ok , just need to trim the arches at the bottom corners using 30mm spacers u shouldnt have a problem with steering Quote Link to comment Share on other sites More sharing options...
lurch Posted May 25, 2009 Author Share Posted May 25, 2009 its a 5 door thanks for the info from what you have said with a bit of triming i may get away with 35's then.. Quote Link to comment Share on other sites More sharing options...
Fern Posted May 25, 2009 Share Posted May 25, 2009 A guy in our club runs 35x14.5 boggers with 2" suspension + 2" body lift with lots of cutting. Other buy runs 33x12.5 bfg with 3" suspension + 1" bodylift and again with fender cutting. For narrower tyres less cutting required. Quote Link to comment Share on other sites More sharing options...
turbonutter Posted May 25, 2009 Share Posted May 25, 2009 its a 5 door thanks for the info from what you have said with a bit of triming i may get away with 35's then.. being a 5 door u may have more of a problem with rubbing , best thing is 2 get sum arches and get the grinder out , take as much as u can out the rear doors Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.