mudmuncher Posted August 5, 2009 Share Posted August 5, 2009 Hi all My 90 (1986) has the dash binnicale without the clock fitted it has a blanking piece where the clock would be. I wanted to fit a oil pressure gauge in that hole but i i wondering it the blanking piece removeable of do i have to buy a binnicale with the 3 gauges in ??? Many thanks Chris Quote Link to comment Share on other sites More sharing options...
western Posted August 5, 2009 Share Posted August 5, 2009 Just push out the blanking part & fit the gauge you want, it's a standard size 52mm hole. http://forums.lr4x4.com/index.php?showtopi...l+presure+gauge have a read & see the linked photo's of my oil pressure gauge fitting Quote Link to comment Share on other sites More sharing options...
errol209 Posted August 5, 2009 Share Posted August 5, 2009 Just push out the blanking part & fit the gauge you want, it's a standard size 52mm hole. Be careful with a 1986 blanking plug, because the little tabs on it will be very brittle, but you can get new ones if you ever take the gauge out again. Quote Link to comment Share on other sites More sharing options...
mudmuncher Posted August 5, 2009 Author Share Posted August 5, 2009 Cheers thanks a lot guys !! Regards Chris Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.